Admin Admin
Number of posts : 163 Age : 36 Location : Philippines Job/hobbies : Webmaster CP# : 00639156217370 Registration date : 2008-06-07
| Subject: play any Sony PSP game online Mon Sep 08, 2008 1:35 am | |
| What you need:
- XLink KAI - download here
- A Sony PSP
- A Linksys WRT54G or WRT546S or Buffalo WBR-G54 wireless router
- Custom PSP / XLink KAID router firmware - download here (ensure you grab the latest version)
- Very basic knowledge of routers/firewalls
Preparing XLink Kai
- After downloading XLink KAI, proceed with the installation - it's a very simple procedure, just run the "xlinkkaievo7.exe" executable.
- Next you'll need to create an "XTag" which will be your XLink user name. Click here to create your XTag now!
- Head to Start -> Programs -> XLink KAI Evolution 7 and run Start KAI Config Tool
- Under UI select Java
- Check Enable PAT, Launch UI and enter your XTag information
- Uncheck Launch Engine - the engine will be running on the router
Flashing your Wireless Router
- Open up the web based router configuration, typically located at http://192.168.1.1. Log in.
- Browse to the Administration -> Firmware Upgrade page
- Select the firmware that you downloaded earlier and DO NOT reset factory defaults.
- Press Upgrade. NOTE: we do not take any responsibility if this firmware renders your router useless.
Preparing the Router
- After the router reboots, log into the web administration interface
- Disable Wireless -> MAC Filter
- Browse to Administration and enter your XLink information under "Kaid Config"
- Interface will be either:
- br0 - this will allow both Xbox and PSP to function on all 3 routers
- eth2 - PSP only on Linksys WRT54G 1.0 and 1.1, and Buffalo WBR-G54 routers
- eth1 - PSP only on Linksys WRT54G 2.0 and 2.2 routers
NOTE: locate the version # beneath the router Browse to Administration -> KaidStart Kaid - this will launch the intergrated XLink Kai engine
Play Online!
- Fire up your PSP and load the game which uses Ad Hoc for multiplayer. (Wipeout Pure, Ridge Racer, etc...)
- Fire up the XLink KAI and go to Menu -> Settings.
- Under the GUI settings, specify the IP address of the KAID engine (IP address of your router)
- Also enter your XTag information
- Connect and join the PSP Arena
- Select the game you wish to play
- On your PSP, put the game in multiplayer mode - join or host a game
- Back at the router configuration under Administrator -> Kaid press "Scan PSP"
- If all goes well, XLink and the router should detect your PSP, allowing you to begin game play!
Tips and Help: if you're experiencing problems
- Note: Any wireless devices on your existing network will not be functional while the router is operating in Ad Hoc (PSP) mode.
- If the KAID engine is unable to start, ensure your router's DNS configuration settings are working correctly.
- If
XLink is unable to detect your PSP, please ensure your router can first. View the status of this under the web-based configuration for your router by going to Administration -> Kaid - you should see the current SSID of your PSP and the Wireless Mode should state PSP.
- Often times I've noticed I'll have to keep clicking "Scan PSP" in order for XLink to initially detect your PSP
Screenshots:
| |
|